BRUSH CUTTER – EXTREME DUTY OPEN FRONT

The extreme duty open front brush cutter is a high-powered, low flow or H-flow, direct drive unit with a 2-year warranty.
The purpose built hydraulic motor drives a 3.5” forged one piece drive spindle with a LIFETIME warranty against breakage ! that is housed in 2 massive bearings.
The direct drive bearing carrier is now grease packed versus oil and can be greased from a zerk under the hood. This new improvement has dramatically reduced down time and bearing failures! Under the deck, instead of a spline shaft, it has a 13” x 1” flange with 10 3/4″ bolts connecting the blade carrier.
The wire protection kit between the deck and the blade carrier keeps fence wire and vines away from the lower bearing seal and reduces down time from hidden debris.
This powerful yet quiet cutter will produce a cleaner cut at a quicker travel speed than was thought possible on a low flow skid steer.
The 10” deck clearance and the raised back allow cut debris to escape and to easily avoid bunching under the deck.

Call for Pricing